Q.What are the modular connector pinouts
A.
Pin 1 / Signal Ground
Pin 2 / CTS
Pin 3 / RXD
Pin 4 / TXD
Pin 5 / +5 Volts (Must not use if supplying 24VDC)
Pin 6 / Signal Ground

Q. How can I connect the FA-ISONET to my PLC?
A. Download the application note andd001.pdf.

Q: What is the current consumption when the FA-ISONET is powered by 24VDC?
A: 60mA @ 24VDC.